| SCTE 01-81 | SCTE 82-163 | SCTE 164-199 | Current HMS MIBs |
| |
|
| ANSI/SCTE 01 2006 |
Specification for "F" Port, Female, Outdoor |
| ANSI/SCTE 02 2006 |
Specification for "F" Port, Female, Indoor |
| ANSI/SCTE 03 2008 |
Test Method for Coaxial Cable Structural Return Loss |
| ANSI/SCTE 04 2007 |
Test Method for "F" Connector Return Loss |
| ANSI/SCTE 05 2008 |
Test Method for "F" Connector Return Loss In-Line Pair |
| ANSI/SCTE 06 2009 |
Composite Distortion Measurements (CSO & CTB) |
| ANSI/SCTE 07 2006 |
Digital Transmission Standard For Cable Television |
| ANSI/SCTE 09 2010 |
Test Method for Cold Bend |
| ANSI/SCTE 10 2008 |
Test Method for Flexible Coaxial Cable Impact |
| ANSI/SCTE 11 2012 |
Test Method for Aerial Cable Corrosion Protection Flow |
| ANSI/SCTE 12 2011 |
Test Method for Center Conductor Bond to Dielectric for Trunk, Feeder and Distribution Coaxial Cables |
| ANSI/SCTE 13 2011 |
Dielectric Air Leakage Test Method For Trunk, Feeder and Distribution Coaxial Cable |
| ANSI/SCTE 14 2011 |
Test Method for Hex Crimp Tool Verification/Calibration
|
| ANSI/SCTE 15 2006 |
Specification for Trunk, Feeder and Distribution Coaxial Cable |
| ANSI/SCTE 16 2012 |
Test Procedure for Hum Modulation |
| ANSI/SCTE 17 2007 |
Test Procedure for Carrier to Noise (C/N, CCN, CIN, CTN) |
|
ANSI/SCTE 18 2007
(J-STD-042A-2007)
|
Emergency Alert Messaging for Cable |
| ANSI/SCTE 19 2006 |
Methods for Isochronous Data Services Transport |
| ANSI/SCTE 20 2012 |
Method for Carriage of Closed Captions and Non-Real Time Sampled Video |
| ANSI/SCTE 21 2012 |
Standard For Carriage Of NTSC VBI Data In Cable Digital Transport Streams |
| ANSI/SCTE 22-1 2012 |
Data-Over-Cable Service Interface Specification DOCSIS 1.0 Radio Frequency Interface (RFI) |
| ANSI/SCTE 22-2 2012 |
DOCSIS 1.0 Baseline Privacy Interface (BPI) |
| ANSI/SCTE 22-3 2012 |
DOCSIS 1.0 Operations Support System Interface (OSSI) |
| ANSI/SCTE 23-1 2010 |
DOCSIS 1.1 Part 1: Radio Frequency Interface |
| ANSI/SCTE 23-2 2012 |
DOCSIS 1.1 Part 2: Baseline Privacy Plus Interface |
| ANSI/SCTE 23-3 2010 |
DOCSIS 1.1 Part 3: Operations Support System Interface
|
| ANSI/SCTE 24-1 2009 |
IPCablecom 1.0 Part 1: Architectural Framework for the Delivery of Time Critical Services Over Cable Television Networks Using Cable Modems |
| ANSI/SCTE 24-2 2009 |
IPCablecom 1.0 Part 2: Audio Codec Requirements for the Provision of Bi-directional Audio Service Over Cable Television Networks Using Cable Modems |
| ANSI/SCTE 24-3 2009 |
IPCablecom Part 3: Network Call Signaling Protocol for the Delivery of Time-Critical Services over Cable Television Using Data Modems |
| ANSI/SCTE 24-4 2009 |
IPCablecom Part 4: Dynamic Quality of Service for the Provision of Real-Time Services over Cable Television Networks Using Cable Modems |
| ANSI/SCTE 24-5 2009 |
IPCablecom Part 5: Media Terminal Adapter (MTA) Device Provisioning Requirements for the Delivery of Real-Time Services over Cable Television Using Cable Modems |
| ANSI/SCTE 24-6 2009 |
IPCablecom Part 6: IPCablecom Management Information Base (MIB) Framework |
| ANSI/SCTE 24-7 2009 |
IPCablecom Part 7: Media Terminal Adapter (MTA) Management Information Base (MIB) Requirements |
| ANSI/SCTE 24-8 2009 |
IPCablecom Part 8: Signaling Management Information Base (MIB) Requirements |
| ANSI/SCTE 24-9 2009 |
IPCablecom Part 9: Event Message Requirements |
| ANSI/SCTE 24-10 2009 |
IPCablecom Part 10: Security Specification |
| ANSI/SCTE 24-11 2009 |
IPCablecom Part 11: Internet Signaling Transport Protocol (ISTP) |
| ANSI/SCTE 24-12 2009 |
IPCablecom Part 12: Trunking Gateway Control Protocol (TGCP) |
| ANSI/SCTE 24-21 2012 |
BV16 Speech Codec Specification for Voice over IP Applications in Cable Telephony; get the source code here |
| ANSI/SCTE 24-22 2007 |
iLBCv2.0 Speech Codec Specification for Voice over IP Applications in Cable Telephony |
| ANSI/SCTE 24-23 2012 |
BV32 Speech Codec Specification for Voice over IP Applications in Cable Telephony; get the source code here |
| ANSI/SCTE 25-1 2008 |
Hybrid Fiber Coax Outside Plant Status Monitoring – Physical (PHY) Layer Specification v1 |
| ANSI/SCTE 25-2 2008 |
Hybrid Fiber Coax Outside Plant Status Monitoring – Media Access Control (MAC) Layer Specification v1.0 |
ANSI/SCTE 25-3 2011
|
Hybrid Fiber Coax Outside Plant Status Monitoring – Power Supply to Transponder Interface Bus (PSTIB) Specification v1.1 1.1 |
| ANSI/SCTE 26 2010 |
Home Digital Network Interface Specification with Copy Protection |
| ANSI/SCTE 27 2011 |
Subtitling Methods for Broadcast Cable |
| ANSI/SCTE 28 2012 |
Host-POD Interface Standard |
| ANSI/SCTE 29-2012 |
Torque Requirements for Bond Wire Penetration of Bonding Set Screw |
| ANSI/SCTE 30 2009 |
Digital Program Insertion Splicing API |
| ANSI/SCTE 31 2007 |
Test Method for Measuring Diameter Over Core |
| ANSI/SCTE 32 2009 |
Ampacity of Coaxial Telecommunications Cables
|
| ANSI/SCTE 33 2010 |
Test Method for Diameter of Drop Cable
|
| ANSI/SCTE 34 2010 |
Test Method for Cored Depth Verification |
| SCTE 35 2013 |
Digital Program Insertion Cueing Message for Cable |
| ANSI/SCTE 36 2012 |
SCTE-ROOT Management Information Base
(MIB) Definitions; get the MIB code directly here |
| ANSI/SCTE 37 2010 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOTS Management Information Base (MIB) Definition; get MIB code directly here |
| ANSI/SCTE 38-1 2009 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-PROPERTY-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-2 2011 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ALARMS-MIB Management Information Base (MIB) Definition get the MIB code directly here |
|
ANSI/SCTE 38-3 2012
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-COMMON-MIB Management Information Base (MIB) Definition; get the MIB code directly here |
| ANSI/SCTE 38-4 2012 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-PS-MIB Management Information Base (MIB) Definition; get the MIB code directly here |
|
ANSI/SCTE 38-5 2008
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-FIBERNODE-MIB Management Information Base (MIB) Definition; get the MIB code directly here |
| ANSI/SCTE 38-6 2012 |
Hybrid Fiber/Coax Outside Plant Status Monitoring – SCTE-HMS-GEN-MIB Management Information Base (MIB) Definition. Get the MIB Code directly here. |
|
ANSI/SCTE 38-7 2008
|
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-Transponder-Interface-Bus(TIB)-MIB Management Information Base (MIB) Definition; get the MIB code directly here |
| ANSI/SCTE 38-8 2009 |
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition; get the MIB code directly here |
| ANSI/SCTE 38-10 2009 |
Outside Plant Status Monitoring SCTE-HMS-RF-AMPLIFIER-MIB Management Information Base (MIB) Definition |
| ANSI/SCTE 38-11 2008 |
HMS Headend Management Information Base (MIB) SCTE-HMS-HEADENDIDENT-MIB; get MIB code directly here |
| ANSI/SCTE 39 2007 |
Test Method for Static Minimum Bending Radius
for Coaxial Trunk, Feeder, and Distribution Cables |
| ANSI/SCTE 40 2011 |
Digital Cable Network Interface Standard |
| ANSI/SCTE 41 2011 |
POD Copy Protection System |
| ANSI/SCTE 42 2008 |
IP Multicast for Digital MPEG Networks |
| ANSI/SCTE 43 2005 |
Digital Video Systems Characteristics Standard for Cable Television |
| ANSI/SCTE 44 2010 |
Test Method for DC Loop Resistance |
| ANSI/SCTE 45 2012 |
Test Method for Group Delay |
| ANSI/SCTE 46 2007 |
Test Method for AC to DC Power Supplies |
| ANSI/SCTE 47 2007 |
Test Method for Coaxial Cable Attenuation |
| ANSI/SCTE 48-1-2007 |
Test Method for Measuring Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell |
|
|
Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices Using Agilent Magnetic Close Field Probe |
| ANSI/SCTE 48-3 2011 |
Test Procedure for Measuring Shielding Effectiveness of Braided Coaxial Drop Cable Using the GTEM Cell |
| ANSI/SCTE 49 2011 |
Test Method for Velocity of Propagation |
| ANSI/SCTE 50 2007 |
Test Procedure for Measuring Regularity of Impedance of Coaxial Cable
|
| ANSI/SCTE 51 2012 |
Method for Determining Drop Cable Braid Coverage |
| ANSI/SCTE 52 2008 |
Data Encryption Standard - Cipher Block Chaining Packet Encryption Specification |
| ANIS/SCTE 53 2008 |
Methods for Asynchronous Data Services Transport |
| ANSI/SCTE 54 2009 |
Digital Video Service Multiplex and Transport System Standard for Cable Television |
| ANSI/SCTE 55-1 2009 |
Digital Broadband Delivery System: Out of Band Transport Part 1: Mode A |
|
|
Digital Broadband Delivery System: Out of Band Transport Part 2: Mode B |
|
|
Digital Multiprogram Distribution by Satellite |
|
|
System Information for Satellite Distribution of Digital Television for Cable and MMDS
|
|
|
AM Cross Modulation Measurements |
|
|
Test Method for Drop Cable Center Conductor Bond to Dielectric |
|
|
Test Method for Interface Moisture Migration Double Ended |
| ANSI/SCTE 61 2012 |
Test Method for Jacket Web Separation |
|
|
Measurement Procedure for Noise Figure |
|
|
Test Method for Voltage Withstand of Outer Jacket |
| ANSI/SCTE 65 2008 |
Service Information Delivered Out-of-Band for Digital Cable Television |
| ANSI/SCTE 66 2008 |
Test Method For Coaxial Cable Impedance |
| ANSI/SCTE 67 2010 |
Recommended Practice for SCTE 35 Digital Program Insertion Cueing Message for Cable |
| SCTE 68 2013 |
Drop Passives: Matching Transformers 75 Ohm to 300 Ohm |
| ANSI/SCTE 69 2007 |
Test Method for Moisture Inhibitor Corrosion Resistance |
|
|
Insulation Resistance Megohmmeter Method |
|
|
Specification for Braided, 75 Ohm, Coaxial, Multi-Purpose Cable |
| ANSI/SCTE 72 2002R2007 |
Test Method for Axial Load Temperature Cycling of Drop Cable/Connector Interface |
| ANSI/SCTE 73 2012 |
Test Method for Insertion Force of Connector to Drop Cable Interface |
| ANSI/SCTE 74 2011 |
Specification for Braided 75 Ohm Flexible RF Coaxial Drop Cable |
| ANSI/SCTE 75 2012 |
Test Point Accuracy |
| ANSI/SCTE 76 2012 |
Antenna Selector Switches |
| SCTE 77 2013 |
Specification for Underground Enclosure Integrity |
| ANSI/SCTE 78 2012 |
Test Method for Transfer Impedance |
|
|
DOCSIS 2.0 Part 1: Radio Frequency Interface |
|
|
DOCSIS 2.0 Part 2: Operations Support System Interface |
| ANSI/SCTE 79-3 2011 |
DOCSIS 2.0 + IPv6 Cable Modem Standard |
| ANSI/SCTE 81 2012 |
Surge Withstand Test Procedure |
| SCTE 01-81 | SCTE 82-163 | SCTE 164-199 |